BGA452Z
Battery Type Lithium-ion
| |
|
|
| |
Ni-Cad (Nickel Cadmium) battery.
These batteries are reasonably priced but are very damaging to the environment. They also need to be completely discharged and cool to be able to accept a full charge.
Ni-MH (Nickel Metal Hydride) battery.
With this battery technology it was possible to increased the amperage to 3.0Ah, they are also a better option environmentally than Ni-Cad. They can be fully charged whether they are warm or partially discharged.
Li-ion or Lithium-ion batteries.
Lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery. These batteries have a chip that communicates with the charger for optimum charging. Lithium-ion batteries also offer much improved charge retention over long periods of storage. Li-ion batteries do not have to be fully discharged before charging in fact they can be charged at any time with no ill effect.
|
|
| |
|
|
Body only machine
| |
|
|
| |
Body only
Body only models are supplied without batteries, charger and case. Due to the one battery fits all aspect of the Makita cordless products our batteries are interchangeable across machines in the same range. This makes putting together the perfect kit more affordable and creates less impact on the environment.
|
|
| |
|
|
Noise sound pressure 73 dB(A)
| |
|
|
| |
Sound level
Machines have the habit of producing noise. Noise above 80 dB (A) is harmful. The maximum time of exposure depends on the sound pressure level:
80dB (A): 8 hours
83dB (A): 4 hours
86dB (A): 2 hours
89dB (A): 1 hours
92dB (A): ½ hour
95dB (A): ¼ hours
|
|
| |
|
|
Noise K factor 3 dB(A)
| |
|
|
| |
K factor
The "K factor" is an industry standard uncertanty figure. It represents the natral variation in testing for noise. The true noise figure could be + or - the K factor figure.
|
|
| |
|
|
Max Wheel Diameter 115 mm
Vibration K factor 1.5 m/sec²
| |
|
|
| |
K factor
The "K factor" is an industry standard uncertanty figure. It represents the natral variation in testing for vibration. The true vibration figure could be + or - the K factor figure.
|
|
| |
|
|
Vibration artificial wheel 8.5 m/sec²
| |
|
|
| |
Vibration
Machines by their nature have the habit of transferring vibration to the user. Use AVT machines to reduce your exposure to vibration. Vibration above
2.5 m / s ² is harmful.
The maximum time of exposure depends on the vibration value:
5 m/s²: 8 hours
10 m/s²: 2 hours
20m/s²: ½ hours
Tri-axial vibration values are used to calculate all Makita vibration figures.
|
|
| |
|
|
Net weight 2.3 kg
| |
|
|
| |
Weight
As a permanent member of EPTA, the European Power Tool Association, Makita is committed to publishing weights in according with the EPTA standards. This standard is derived from EU Directive 1999/44/EC. The standard is a strict agreement with EPTA as to how different machines are to be weighted, so you can compare machines across the market.
|
|
| |
|
|
BHP451Z
Dimensions (LxWxH):
250 x 78 x 257 mm
Battery Type Lithium-ion
| |
|
|
| |
Ni-Cad (Nickel Cadmium) battery.
These batteries are reasonably priced but are very damaging to the environment. They also need to be completely discharged and cool to be able to accept a full charge.
Ni-MH (Nickel Metal Hydride) battery.
With this battery technology it was possible to increased the amperage to 3.0Ah, they are also a better option environmentally than Ni-Cad. They can be fully charged whether they are warm or partially discharged.
Li-ion or Lithium-ion batteries.
Lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery. These batteries have a chip that communicates with the charger for optimum charging. Lithium-ion batteries also offer much improved charge retention over long periods of storage. Li-ion batteries do not have to be fully discharged before charging in fact they can be charged at any time with no ill effect.
|
|
| |
|
|
Body only machine
| |
|
|
| |
Body only
Body only models are supplied without batteries, charger and case. Due to the one battery fits all aspect of the Makita cordless products our batteries are interchangeable across machines in the same range. This makes putting together the perfect kit more affordable and creates less impact on the environment.
|
|
| |
|
|
Blows per minute 3: 0-25500 2: 0-9000 1: 0-4500 bpm
Noise sound pressure 86 dB(A)
| |
|
|
| |
Sound level
Machines have the habit of producing noise. Noise above 80 dB (A) is harmful. The maximum time of exposure depends on the sound pressure level:
80dB (A): 8 hours
83dB (A): 4 hours
86dB (A): 2 hours
89dB (A): 1 hours
92dB (A): ½ hour
95dB (A): ¼ hours
|
|
| |
|
|
Noise sound power 97 dB(A)
| |
|
|
| |
Sound level
Machines have the habit of producing noise. Noise above 80 dB (A) is harmful. The maximum time of exposure depends on the sound pressure level:
80dB (A): 8 hours
83dB (A): 4 hours
86dB (A): 2 hours
89dB (A): 1 hours
92dB (A): ½ hour
95dB (A): ¼ hours
|
|
| |
|
|
Noise K factor 3 dB(A)
| |
|
|
| |
K factor
The "K factor" is an industry standard uncertanty figure. It represents the natral variation in testing for noise. The true noise figure could be + or - the K factor figure.
|
|
| |
|
|
No load speed 3. 0 - 1700, 2. 0 - 600, 1. 0 - 300 rpm
Vibration drilling 2.5 m/sec²
| |
|
|
| |
Vibration
Machines by their nature have the habit of transferring vibration to the user. Use AVT machines to reduce your exposure to vibration. Vibration above
2.5 m / s ² is harmful.
The maximum time of exposure depends on the vibration value:
5 m/s²: 8 hours
10 m/s²: 2 hours
20m/s²: ½ hours
Tri-axial vibration values are used to calculate all Makita vibration figures.
|
|
| |
|
|
Vibration K factor 2.5 m/sec²
| |
|
|
| |
K factor
The "K factor" is an industry standard uncertanty figure. It represents the natral variation in testing for vibration. The true vibration figure could be + or - the K factor figure.
|
|
| |
|
|
Vibration hammer drilling 10 m/sec²
| |
|
|
| |
Vibration
Machines by their nature have the habit of transferring vibration to the user. Use AVT machines to reduce your exposure to vibration. Vibration above
2.5 m / s ² is harmful.
The maximum time of exposure depends on the vibration value:
5 m/s²: 8 hours
10 m/s²: 2 hours
20m/s²: ½ hours
Tri-axial vibration values are used to calculate all Makita vibration figures.
|
|
| |
|
|
Net weight 2.2 kg
| |
|
|
| |
Weight
As a permanent member of EPTA, the European Power Tool Association, Makita is committed to publishing weights in according with the EPTA standards. This standard is derived from EU Directive 1999/44/EC. The standard is a strict agreement with EPTA as to how different machines are to be weighted, so you can compare machines across the market.
|
|
| |
|
|
BJR181Z
Strokes per minute
0- 2900 spm
Battery Type Lithium-ion
| |
|
|
| |
Ni-Cad (Nickel Cadmium) battery.
These batteries are reasonably priced but are very damaging to the environment. They also need to be completely discharged and cool to be able to accept a full charge.
Ni-MH (Nickel Metal Hydride) battery.
With this battery technology it was possible to increased the amperage to 3.0Ah, they are also a better option environmentally than Ni-Cad. They can be fully charged whether they are warm or partially discharged.
Li-ion or Lithium-ion batteries.
Lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery. These batteries have a chip that communicates with the charger for optimum charging. Lithium-ion batteries also offer much improved charge retention over long periods of storage. Li-ion batteries do not have to be fully discharged before charging in fact they can be charged at any time with no ill effect.
|
|
| |
|
|
Body only machine
| |
|
|
| |
Body only
Body only models are supplied without batteries, charger and case. Due to the one battery fits all aspect of the Makita cordless products our batteries are interchangeable across machines in the same range. This makes putting together the perfect kit more affordable and creates less impact on the environment.
|
|
| |
|
|
Noise sound pressure 84 dB(A)
| |
|
|
| |
Sound level
Machines have the habit of producing noise. Noise above 80 dB (A) is harmful. The maximum time of exposure depends on the sound pressure level:
80dB (A): 8 hours
83dB (A): 4 hours
86dB (A): 2 hours
89dB (A): 1 hours
92dB (A): ½ hour
95dB (A): ¼ hours
|
|
| |
|
|
Noise sound power 95 dB(A)
| |
|
|
| |
Sound level
Machines have the habit of producing noise. Noise above 80 dB (A) is harmful. The maximum time of exposure depends on the sound pressure level:
80dB (A): 8 hours
83dB (A): 4 hours
86dB (A): 2 hours
89dB (A): 1 hours
92dB (A): ½ hour
95dB (A): ¼ hours
|
|
| |
|
|
Noise K factor 3 dB(A)
| |
|
|
| |
K factor
The "K factor" is an industry standard uncertanty figure. It represents the natral variation in testing for noise. The true noise figure could be + or - the K factor figure.
|
|
| |
|
|
Vibration K factor 2 m/sec²
| |
|
|
| |
K factor
The "K factor" is an industry standard uncertanty figure. It represents the natral variation in testing for vibration. The true vibration figure could be + or - the K factor figure.
|
|
| |
|
|
Vibration cutting chipboard 18.5 m/sec²
| |
|
|
| |
Vibration
Machines by their nature have the habit of transferring vibration to the user. Use AVT machines to reduce your exposure to vibration. Vibration above
2.5 m / s ² is harmful.
The maximum time of exposure depends on the vibration value:
5 m/s²: 8 hours
10 m/s²: 2 hours
20m/s²: ½ hours
Tri-axial vibration values are used to calculate all Makita vibration figures.
|
|
| |
|
|
Net weight 3.7 kg
| |
|
|
| |
Weight
As a permanent member of EPTA, the European Power Tool Association, Makita is committed to publishing weights in according with the EPTA standards. This standard is derived from EU Directive 1999/44/EC. The standard is a strict agreement with EPTA as to how different machines are to be weighted, so you can compare machines across the market.
|
|
| |
|
|
BSS610Z
Battery Type Lithium-ion
| |
|
|
| |
Ni-Cad (Nickel Cadmium) battery.
These batteries are reasonably priced but are very damaging to the environment. They also need to be completely discharged and cool to be able to accept a full charge.
Ni-MH (Nickel Metal Hydride) battery.
With this battery technology it was possible to increased the amperage to 3.0Ah, they are also a better option environmentally than Ni-Cad. They can be fully charged whether they are warm or partially discharged.
Li-ion or Lithium-ion batteries.
Lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery. These batteries have a chip that communicates with the charger for optimum charging. Lithium-ion batteries also offer much improved charge retention over long periods of storage. Li-ion batteries do not have to be fully discharged before charging in fact they can be charged at any time with no ill effect.
|
|
| |
|
|
Body only machine
| |
|
|
| |
Body only
Body only models are supplied without batteries, charger and case. Due to the one battery fits all aspect of the Makita cordless products our batteries are interchangeable across machines in the same range. This makes putting together the perfect kit more affordable and creates less impact on the environment.
|
|
| |
|
|
Noise sound pressure 91 dB(A)
| |
|
|
| |
Sound level
Machines have the habit of producing noise. Noise above 80 dB (A) is harmful. The maximum time of exposure depends on the sound pressure level:
80dB (A): 8 hours
83dB (A): 4 hours
86dB (A): 2 hours
89dB (A): 1 hours
92dB (A): ½ hour
95dB (A): ¼ hours
|
|
| |
|
|
Noise sound power 102 dB(A)
| |
|
|
| |
Sound level
Machines have the habit of producing noise. Noise above 80 dB (A) is harmful. The maximum time of exposure depends on the sound pressure level:
80dB (A): 8 hours
83dB (A): 4 hours
86dB (A): 2 hours
89dB (A): 1 hours
92dB (A): ½ hour
95dB (A): ¼ hours
|
|
| |
|
|
Noise K factor 3 dB(A)
| |
|
|
| |
K factor
The "K factor" is an industry standard uncertanty figure. It represents the natral variation in testing for noise. The true noise figure could be + or - the K factor figure.
|
|
| |
|
|
Vibration K factor 1.5 m/sec²
| |
|
|
| |
K factor
The "K factor" is an industry standard uncertanty figure. It represents the natral variation in testing for vibration. The true vibration figure could be + or - the K factor figure.
|
|
| |
|
|
Vibration cutting chipboard 2.5 m/sec²
| |
|
|
| |
Vibration
Machines by their nature have the habit of transferring vibration to the user. Use AVT machines to reduce your exposure to vibration. Vibration above
2.5 m / s ² is harmful.
The maximum time of exposure depends on the vibration value:
5 m/s²: 8 hours
10 m/s²: 2 hours
20m/s²: ½ hours
Tri-axial vibration values are used to calculate all Makita vibration figures.
|
|
| |
|
|
Net weight 3.2 kg
| |
|
|
| |
Weight
As a permanent member of EPTA, the European Power Tool Association, Makita is committed to publishing weights in according with the EPTA standards. This standard is derived from EU Directive 1999/44/EC. The standard is a strict agreement with EPTA as to how different machines are to be weighted, so you can compare machines across the market.
|
|
| |
|
|
BTD140Z
Machine Screw Size M4-M8 mm
Coarse thread (length) 22 - 125 mm
Battery Type Lithium-ion
| |
|
|
| |
Ni-Cad (Nickel Cadmium) battery.
These batteries are reasonably priced but are very damaging to the environment. They also need to be completely discharged and cool to be able to accept a full charge.
Ni-MH (Nickel Metal Hydride) battery.
With this battery technology it was possible to increased the amperage to 3.0Ah, they are also a better option environmentally than Ni-Cad. They can be fully charged whether they are warm or partially discharged.
Li-ion or Lithium-ion batteries.
Lighter weight, quicker charging and with more run time than an equal voltage Ni-Cad or Ni-MH battery. These batteries have a chip that communicates with the charger for optimum charging. Lithium-ion batteries also offer much improved charge retention over long periods of storage. Li-ion batteries do not have to be fully discharged before charging in fact they can be charged at any time with no ill effect.
|
|
| |
|
|
Body only machine
| |
|
|
| |
Body only
Body only models are supplied without batteries, charger and case. Due to the one battery fits all aspect of the Makita cordless products our batteries are interchangeable across machines in the same range. This makes putting together the perfect kit more affordable and creates less impact on the environment.
|
|
| |
|
|
Noise sound pressure 90 dB(A)
| |
|
|
| |
Sound level
Machines have the habit of producing noise. Noise above 80 dB (A) is harmful. The maximum time of exposure depends on the sound pressure level:
80dB (A): 8 hours
83dB (A): 4 hours
86dB (A): 2 hours
89dB (A): 1 hours
92dB (A): ½ hour
95dB (A): ¼ hours
|
|
| |
|
|
Noise sound power 101 dB(A)
| |
|
|
| |
Sound level
Machines have the habit of producing noise. Noise above 80 dB (A) is harmful. The maximum time of exposure depends on the sound pressure level:
80dB (A): 8 hours
83dB (A): 4 hours
86dB (A): 2 hours
89dB (A): 1 hours
92dB (A): ½ hour
95dB (A): ¼ hours
|
|
| |
|
|
Noise K factor 3 dB(A)
| |
|
|
| |
K factor
The "K factor" is an industry standard uncertanty figure. It represents the natral variation in testing for noise. The true noise figure could be + or - the K factor figure.
|
|
| |
|
|
No load speed 0 - 2300 rpm
Vibration fastenning bolt 17 m/sec²
| |
|
|
| |
Vibration
Machines by their nature have the habit of transferring vibration to the user. Use AVT machines to reduce your exposure to vibration. Vibration above
2.5 m / s ² is harmful.
The maximum time of exposure depends on the vibration value:
5 m/s²: 8 hours
10 m/s²: 2 hours
20m/s²: ½ hours
Tri-axial vibration values are used to calculate all Makita vibration figures.
|
|
| |
|
|
Vibration K factor 1.5 m/sec²
| |
|
|
| |
K factor
The "K factor" is an industry standard uncertanty figure. It represents the natral variation in testing for vibration. The true vibration figure could be + or - the K factor figure.
|
|
| |
|
|
Net weight 1.3 kg
| |
|
|
| |
Weight
As a permanent member of EPTA, the European Power Tool Association, Makita is committed to publishing weights in according with the EPTA standards. This standard is derived from EU Directive 1999/44/EC. The standard is a strict agreement with EPTA as to how different machines are to be weighted, so you can compare machines across the market.
|
|
| |
|
|
